Menu
EXCAVATOR CX220E
Construction CASE
At 50,000 pounds and engineered for pure power, speed, responsiveness and operator satisfaction, the CX220E is built to do one thing: work. Big enough to put up serious production numbers, versatile enough to be seen on projects ranging from basement digs to massive freeway construction. When in doubt — the CX220E is a good place to start. From the entirely new and enhanced operator experience to OEM-fit machine control solutions, the CX220E has the ability to be your most valuable excavator.
Features
Details
Data sheets
Features
A Whole New Command Center
A massive new 10-inch LCD display serves as the control center and provides even greater access and visibility to cameras, machine data and controls. This includes the ability to customize your view (with rear, sideview and Max View™ perspectives) at the same time while still accessing machine data and controls — ensuring optimal visibility and jobsite awareness. The display includes intuitive customization capabilities that help the operator make the workspace their own. And four new operating modes available to be set in a range of up to 10 throttle settings allow operators to better dial in performance to their work. The new Eco mode drives lower fuel consumption by as much as 18 percent compared to previous CASE excavators1. 1Varies by model and application Watch Video:
Even More Hydraulic Control
CASE excavators have always been fast, smooth, powerful and responsive — all-new CASE E Series excavators take that to the next level with Hydraulic Flow Control Balance. Hydraulic Flow Control Balance allows you to customize the priority of hydraulic flow used for arm in and boom up movements, and for arm in and swinging movements. The operator can throw greater priority to one movement over the other based on their digging or truck loading style. This makes the excavator even more responsive and efficient based on the type of work and operator preference. Watch Video:
A Powerful Attachment Platform
E Series excavators allow operators to set and store numerous attachments within the massive new LCD monitor. This is available for both one-way and two-way hydraulic attachments, and provides the ability to direct additional pump flow to the attachment during two-way operation. It also lets the operator set the power going to the attachment within the demands of the job and within the recommended specs of the attachment. This makes it easier to operate an attachment, and ensures that the operator will not put more flow to that attachment than it can handle. This leads to optimal attachment performance, and prevents possible damage or downtime related to putting too much flow or power into the attachment. Watch Video:
Even More Engine Power
New FPT Industrial engines bring CASE E Series excavators even more power, performance and fuel efficiency! This includes increased torque, horsepower, transient response and emissions simplification — as well as extended service intervals. These engines help make CASE excavators easy to own, easy to maintain, and extremely efficient. Watch Video:
Precision Solutions Directly from CASE
OEM-Fit 2D and 3D semi-automatic machine control solutions featured on new CASE E Series excavators ensure that the optimal combination of machine and solution is installed and tested by CASE certified precision field specialists. It also simplifies the acquisition process and allows for the technology to be grouped in with the purchase of the machine — combining the financing or lease approval, rate and payment in a single package. It also helps improve the residual/resale value of the machine.
Improve Uptime with Collaborative Fleet Management
CASE E Series excavators drive greater uptime and improved service with the introduction of new connectivity capabilities across the product line. This is achieved with the new SiteConnect Module along with the new SiteManager App (iOS and Android). This app pairs your phone or device to the machine to enable remote analysis. Certified CASE technicians then diagnose the health of each connected machine through parameter readings and fault codes — and determines whether the issue can be addressed remotely (such as clearing codes or updating software) or if it requires a trip to the machine. CASE also leverages the SiteConnect Module to further improve telematics data for real-time monitoring, management of maintenance and service intervals, examination of equipment utilization and overall machine record-keeping. It also improves the collaboration between equipment owner, dealer and manufacturer by sharing — at their discretion — real-time machine information with the dealer and the CASE Uptime Center in Racine, Wis.
Protected by CASE ProCare
Each CASE E Series excavator provides peace of mind and controlled owning and operating expenses with ProCare:
- Three-year, 3,000-hour full-machine factory warranty
- Three-year, 2,000-hour planned maintenance contract
- Three-year CASE SiteWatch™ telematics subscription
Details
STANDARD EQUIPMENT
ENGINE
- FPT NEF6
- Tier 4 Final/Stage V Certified
- Selective Catalytic Reduction on Filter – SCRoF
- Six-cylinder turbo-charged diesel
- Fixed geometry turbocharger
- High pressure common rail system – electronic
- Neutral safety start
- Auto-engine warm up
- Air intake heater
- Fuel Economy Assist System – FEA
- Engine Protection Feature – EPF
- Dual-stage fuel filtration
- Dual element air filter
- Remote oil filter
- Drain for fuel tank
- 1,000-hour engine oil/filter interval
- 24-volt system
- Engine oil sample port
- Battery disconnect switch
- Emergency engine stop
- External Fuel and DEF gauges
- Fan housing
- Fuel cooler
- Fuel filter restriction indicator
- Fuel shut-off valve
- Radiator, oil cooler, intercooler – protective chaff screen
FUEL ECONOMY SYSTEMS
- Engine Idle/Fuel Economy System:
- Auto-idle
- One-touch idle
- Auto-idle shut-down
- BEC – Boom Economy Control
- AEC – Auto Economy Control
- SWC – Swing Relief Control
- SSC – Spool Stroke Control
UPPER STRUCTURE
- ISO mirrors – 3
- Cab ISO-Mounts – fluid and spring
- Upper mounted work light – 70 watt
- Swivel guard belly pan
- Center cover – over main CV
- Fuel tank belly pan
- Handrail – RH access
- ISO guard rails
- Lifting eyes for counterweight
- Lockable fuel cap, service doors and tool box
HYDRAULICS
- Boom/Arm/Bucket/Swing: Pilot pressure control system (ISO or SAE control pattern)
- Work mode select:
- 1 SP – mode
- 2 Power – mode
- 3 Eco – mode
- 4 Lift – mode
- Travel mode select – 2-speed travel with auto downshift
- Attachment cushion control
- Hydraulic lock – gate lock, left side tilt console
- Single pedal travel
- Custom flow balance adjustment:
- Arm in vs. boom up
- Arm in vs. swing
- Multi-function with electronic pressure and flow control/joystick activated with electronic configurable proportional controls
ATTACHMENTS
- Boom – 18 ft 8 in (5.70 m)
- Arm – 9 ft 8 in (2.94 m)
- Heavy-duty bucket linkage
- Boom mounted work light – 70 watt
- Auxiliary pipe brackets
- Centralized grease fittings
- Attachment cushion valve
- Arm and boom regeneration
- Bucket anti-clatter device
- Chrome pins
- Easy Maintenance System (EMS) bushings
- Teardrop pin retention keepers
OPERATOR ENVIRONMENT
- Operators cab:
- Smooth and round shape design cab
- Safety glass for all windows
- Shock-less cab suspension by 4-point fluid mounting
- Sliding front window with auto lock
- 10 in Full-color LCD monitor display
- Membrane switch on monitor display with 5 configurable button on bottom of monitor
- Switch panel – including throttle dial with eco-mode switch
- Windshield wiper & washer
- AM/FM/Bluetooth Radio with hands-free phone
- Sectioned floor mat
- Polycarbonate roof hatch & Sun shade
- Auto climate control
- Roll-over protective structure – ROPS
- Top guard OPG level 1 – in cab structure
- Operator’s seat:
- Low frequency air suspension with air springs and double acting hydraulic damper
- With following features:
- Manual weight adjustment
- Backrest angle adjustment
- Seat height adjustment
- Adjustable armrest – Angle and height
- Adjustable headrest
- Retractable seat belt
- Adjustable lumbar support
- Console mount on suspension
- Control consoles adjustindependently of seat
- Others:
- Rear view mirror – Cab side & Right side
- Rear & Right-side view Camera
TELEMATICS
- CASE SiteWatch™ Telematics – includes hardware and a 3-yr Advanced data subscription for 2-way communication
OPTIONAL EQUIPMENT
ENGINE
- Refueling pump
- Air pre-cleaner – Cyclone
- High ambient temperature cooling package
HYDRAULICS
- Auxiliary hydraulics:
- Proportionally controlled secondary low-flow auxiliary hydraulics
- Hose Burst Check Valve – HBCV
MACHINE CONTROL
- Leica iCON iXE2 – 2D System
- Leica iCON iXE3 – 3D System
ATTACHMENTS
- Heavy-duty arm – 7 ft 10 in (2.40 m)
- Quick coupler/Case multi-pin grabber
- Tools:
- Heavy-duty/Extreme-duty/Ditching Buckets
- Hammers
- Thumbs
- Compaction plates
UPPER STRUCTURE
- Rubber bumper guard – order through Service Parts
UNDERCARRIAGE
- 23.6 in (600 mm) rubber link chain, bolt-on rubber pads on steel chain
- 23.6 in (600 mm) steel shoes, triple semi-grouser
- 27.6 in (700 mm) steel shoes, triple semi-grouser
- Track guides – triple
OPERATOR ENVIRONMENT
- FOPS cab top guard – Level 2
- Front grill guard – 2 x 2 in (50.8 x 50.8 mm) screen mesh
- Front rock guard – vertical bars Two piece/OPG 1
- Front rock guard – vertical bars One piece/OPG 2
- Vandal guard (front window) with common key
- Rain deflector – not available with front guards
- Sun visor
- Max View Monitor – 3 cameras with 270-degree view
- LED Package:
- Includes 6 LED Lights – 2 front cab mounted, 2 rear mounted and 1 mounted on each side
Data sheets
CX220E Specifications
CX220E LR Specifications
CX220E Narrow Long Undercarriage Specifications
CASE EXCAVATORS
FULL LINE BROCHURE
Machine Control Solutions – Excavators
Financing and
Leasing available
Practical payment options for the equipment you need
At Terapro Construction, we have various financing options, offering the best rates on the market for your purchase or long-term lease of new or used equipment. In some cases, we’ll even take back your used equipment. Talk to your representative for more information.
